型號：
| MTVseries selection guide | |||||||
| Obsolete reference system | Current reference System | Vout | Pola- rity | lout/Pout | Vin | Control | Otption |
| MT12N601831-5R | MTV12N0.6-0.5-C5 | 600V | - | 0.83mA/0.5W | 12V | 5V | Pin |
| MT12N601831-10R | MTV12N0.6-0.5-C10 | - | 10V | Pin | |||
| MT12N601831-5R-W | MTV12N0.6-0.5-C5-L | - | 5V | Wire | |||
| MT12N601831-10R-W | MTV12N0.6-0.5-C10-L | - | 10V | Wire | |||
| MT12P601831-5R | MTV12P0.6-0.5-C5 | 十 | 5V | Pin | |||
| MT12P601831-10R | MTV12P0.6-0.5-C10 | 十 | 10V | Pin | |||
| MT12P601831-5R-W | MTV12P0.6-0.5-C5-L | 十 | 5V | Wire | |||
| MT12P601831-10R-W | MTV12P0.6-0.5-C10-L | 十 | 10V | Wire | |||
| MT15N601132-5R | MTV15N0.6-0.8-C5 | - | 1.33mA/0.8W | 15V | 5V | Pin | |
| MT15N601132-10R | MTV15N0.6-0.8-C10 | - | 10V | Pin | |||
規(guī)格參數(shù)：
| Parameters | Specifications | |||
| Input voltage Vin(pins 1&2) | 12Vdc±0.5 or 15Vdc±0.5cor 24Vdc±1,according to the model. | |||
| Input current | At no load:15mA. At full load,from to 65mA to 100mA,according to the input voltage. | |||
| HV output Vout (pin 7 or flying lead optional) | Programmable nominal voltage,refer to the Selection Guide for voltage ranges, accuracy:±0.2%at the max voltage. | |||
| Outpout voltage polarity | Fixed positive or negative,according to the model | |||
| Output voltage setting (pins 3,4 &5) | Option 1:via an external potentiometer,minimum 10kQ (use Ref.Volt- agepin5). Option 2:via an external voltage 0/5Vor 0/10V,according to the model. Note:input impedance of the control input(pin 4)=1MQ. | |||
| Max.output current lout | Refer to the Selection Guide. | |||
| Load Voltage regulation | ±0.01%of the full output voltage,no load to full load. | |||
| Line Voltage regulation | ±0.01%of the full output voltage over the specified input voltage range. | |||
| Ripple | Between 10mV to 40mVpeak-to-peak at full load,according to the model. | |||
| Temperature coefficient | 100ppm/C over the temperature range O to 50℃. | |||
| HV monitoring output (Vmon) (pin 6) | +1V/kVor -1V/kV according to the polarity of the model,accuracy:±2%, output impedance=200MQ,TC=100ppm/℃(passive voltage divider). | |||
| Reference Voltage(pin 3) | -option 1:5V, -option 2:10V, accuracy:±0.05%,TC50ppm/℃,max output current:1mA | |||
| Operating temperature range | 40℃to+50℃ | |||
| Storage temperature range | 40℃to+70℃ | |||
| Safeguards | -Arc and short circuit protection. -Protected against reverse Vin. | |||
| Option | -Flying lead for the HV output instead of the pin 7 (suffix“L”) | |||
| Package Configuration | ||||
| Case material | Tin steel plate Thickness 0.5mm | |||
| Case dimensions | L 46.0xW 12.0x24.6mm | |||
| Pins | Through roundpins,diameter:0.46mm,length:3mm,spacing: 2.54mmm.Option:flying wire for the HV output | |||
| PCB mounting | 4 mounting tabs,length:5mm,thickness:0.5mm | |||
| Weight | 35g | |||
| Insulation | Fully potted with an UL epoxy resin | |||
| Pins'function | ||||
| Line input | #1:Supply #2:OV supply | |||
| HV setting | #3:0V signal #4:Control input #5:Voltage reference | |||
| HV monitor | #6:Voltage monitor | |||
| HV output | #7:output | |||
